Rod Bearing Cap

Rod Bearing Cap





Install connecting rod cap.
Match the stamped cylinder number marks on the connecting rod with those on the cylinder cap to install.





Tighten connecting rod bolts using Tool.
Tool number: KV10112100 (BT-8653-A)
Connecting rod bolts
Step 1 19.6 Nm (1.5 kg-m, 11 ft-lb)
Step 2 90° clockwise
Apply engine oil to threads and seats of connecting rod bolts.
After tightening bolts, make sure the crankshaft rotates smoothly.

CONNECTING ROD BOLT DIAMETER
Measure diameter "d" at position shown.





When "d" is out of specifications (when it becomes thinner), replace bolt with a new one.
Limit 7.75 mm (0.3051 in) or less.