Cabin Air Filter / Purifier: Service and Repair

Changing In-cabin Microfilter





1. Remove the two lower glove box hinge pins to remove the glove box from the instrument panel and let it hang from the cord.





2. Remove the screw and remove the in-cabin microfilter cover.
3. Remove the in-cabin microfilters from the front heater and cooling unit assembly housing.





4. Insert the first new in-cabin microfilter into the front heater and cooling unit assembly housing and slide it over to the right. Insert the second new in-cabin microfilter into the front heater and cooling unit assembly housing.

NOTE: The in-cabin microfilters are marked with air flow arrows. The end of the microfilter with the arrow should face the rear of the vehicle. The arrows should point downward.





5. Install the in-cabin microfilter cover.





6. Install the lower glove box in the instrument panel and secure it with the two hinge pins.