Component Inspection
Component InspectionFUEL PUMP
1. Disconnect "fuel level sensor unit and fuel pump" harness connector.
2. Check resistance between fuel level sensor unit and fuel pump terminals 1 and 3.
Resistance: 0.2 - 5.0 ohms [at 25 °C (77 °F)]
DROPPING RESISTOR
1. Turn ignition switch OFF.
2. Disconnect dropping resistor harness connector.
3. Check resistance between dropping resistor terminals as 1 and 2.
CONDENSER-2
1. Turn ignition switch OFF.
2. Disconnect condenser-2 harness connector.
Resistance: 0.2 - 5.0 ohms [at 25 °C (77 °F)]
3. Check resistance between condenser-2 terminals as 1 and 2.