Cruise Test - Part 3
Cruise Test - Part 31. IDENTIFY SHIFTER LOCATION
Identify the shifter location.
Is the shifter located on the steering column?
YES >> GO TO 2.
NO >> GO TO 4.
2. MANUAL MODE FUNCTION
Move to manual mode from D position.
Does it switch to manual mode?
YES >> GO TO 3.
NO >> Continue road test and add check mark to "Cannot Be Changed to Manual Mode (Column Shift)" on diagnostics worksheet.
3. CHECK SHIFT-DOWN
During manual mode driving, move gear selector from M5 -> M4 -> M3 -> M2 -> M1.
With CONSULT-II
Read the gear position.
Is downshifting correctly performed?
YES >> GO TO 5.
NO >> Enter a check mark at "Vehicle does not shift" at the corresponding position (5th -> 4th, 4th -> 3rd, 3rd -> 2nd, 2nd -> 1st) on the diagnostics worksheet, then continue the road test.
4. CHECK SHIFT-DOWN
During D5 driving, move gear selector from D -> 4 -> 3 -> 2 -> 1.
With CONSULT-II
Read the gear position.
Is downshifting correctly performed?
YES >> GO TO 5.
NO >> Enter a check mark at "Vehicle does not shift" at the corresponding position (5th -> 4th, 4th -> 3rd, 3rd -> 2nd, 2nd -> 1st) on the diagnostics worksheet, then continue the road test.
5. CHECK ENGINE BRAKE
Does engine braking effectively reduce speed in M1 position (column shift) or 1[1] position (floor shift)?
YES >>
1. Stop the vehicle.
2. Carry out the self-diagnostics. Refer to AT-89, "CONSULT-II START PROCEDURE". Consult-II Start Procedure
NO >> Enter a check mark at "Vehicle Does Not Decelerate By Engine Brake" on the diagnostics worksheet, then continue trouble diagnosis.