Without Intelligent Key System

Removal and Installation

FRONT DOOR

CAUTION:
- When removing and installing the door assembly, support the door with a jack and shop cloth to protect the door and body.
- When removing and installing door assembly, be sure to carry out the fitting adjustment.
- Check the hinge rotating part for poor lubrication. If necessary, apply "body grease".

1. Remove the front door glass and regulator.
2. Remove the door harness.




3. Remove the check link bolt from the hinge pillar.

Check link to hinge pillar 14.7 N.m (1.5 kg-m, 11 ft-lb) bolt




4. Remove the door-side hinge nuts, and the door assembly.

Door hinge nuts 24.5 N.m (2.5 kg-m, 18 ft-lb)

Installation is in the reverse order of removal.