With Intelligent Key System
ON-VEHICLE REPAIRHOOD
Fitting Adjustment
CLEARANCE AND SURFACE HEIGHT ADJUSTMENT
1. Remove the front grille.
2. Loosen the hood lock assembly and adjust the rubber bumpers until the surface height of the hood becomes 1 mm (0.04 in) lower than the fender.
3. Engage the hood striker and temporarily tighten.
4. Check the lock and striker for looseness.
5. Tighten the bolts to specification.
6. Adjust the surface height of the hood according to the fitting standard dimension by rotating right and left rubber bumpers.
7. Install the front grille.