Check Before Engine Is Started

Check Before Engine Is Started

1. CHECK O/D OFF INDICATOR LAMP
1. Park vehicle on level surface.
2. Move selector lever to "P" position.
3. Turn ignition switch to "OFF" position and wait at least 10 seconds.
4. Turn ignition switch to "ON" position. (Do not start engine.)
Does O/D OFF indicator lamp light up for about 2 seconds?
YES >> 1. Turn ignition switch "OFF".
2. Perform self-diagnostics and record all NG items on the TM-7, "Diagnostic Work Sheet". Diagnostic Work Sheet
Refer to TM-35, "CONSULT-III Function (TRANSMISSION)", TM-42, "Diagnosis Procedure without CONSULT-III".
Consult-III Function (Transmission)
Diagnosis Procedure Without Consult-III
3. Go to TM-190, "Check at Idle". Check at Idle
NO >> Stop the test and go to TM-126, "O/D OFF Indicator Lamp Does Not Come On (Without Manual Mode)". A/T Check Indicator Lamp Does Not Come On (With Manual Mode)