Rod Bearing Cap

ROD BEARING CAP





Tighten connecting rod bolts using Tool.
Tool number KV10112100 (BT-8653-A)
Connecting rod bolts
Step 1 19.6 Nm (1.5 kg-m, 11 ft-lb)
Step 2 90° clockwise
Apply engine oil to threads and seats of connecting rod bolts.
After tightening bolts, make sure the crankshaft rotates smoothly.

CONNECTING ROD BOLT DIAMETER





Measure diameter "d" at position shown.
When "d" is out of specifications (when it becomes thinner), replace bolt with a new one.
Limit 7.75 mm (0.3051 in) or less.