Sunroof Switch System Inspection

SUNROOF


Sunroof Switch System Inspection

1.CHECK HARNESS CONTINUITY
1. Turn ignition switch OFF.
2. Disconnect sunroof motor assembly and sunroof switch.
3. Check continuity between sunroof motor assembly connector R4 terminals 3, 4, 8, 9 and 10 and sunroof switch connector R104 terminals 1, 2, 3, 4 and 6.











OK or NG
OK - GO TO 2.
NG - Repair or replace harness.
2.CHECK SUNROOF SWITCH





Operate sunroof switch, and check continuity of the sunroof switch as follows.






OK or NG
OK - Sunroof switch and harness are OK. Refer to Trouble Diagnosis Chart By Symptom.
NG - Replace sunroof switch.