Slide Motor And Slide Gear

FRONT SEAT


Slide Motor and Slide Gear


REMOVAL AND INSTALLATION

Removal

CAUTION:
Do not bend drive cable to prevent slide motor operation noise.

NOTE:
Remove and reinstall slide motor, drive cable, and slide gears from driver seat power frame assembly as if it were one unit.
1. Remove seat cushion Refer to Seat Cushion.





2. Remove seat track bolts (A).
3. Remove seat cushion front finisher.
4. Remove top screw from the seat cushion inner and outer finishers.
5. Disconnect slide motor connector.
6. Remove forward bolts from driver seat power frame assembly.
7. Remove slide gear box nuts.
8. Slide both seat rails to rear position.
9. Remove slide gear and slide motor.





10. Remove drive cable (1) by releasing tab (2).

Installation

NOTE:
- Before reinstalling slide motor or slide gear, measure distance between slide gear box and a slide gear box bolt and adjust slide gears so the distance is equal for both slide gears.
Installation is the reverse order of removal.