Harness

HARNESS

Harness Layout

HOW TO READ HARNESS LAYOUT
The following Harness Layouts use a map style grid to help locate connectors on the drawings:

- Main Harness and Air Conditioner Control Sub-harness
- Engine Room Harness (RH View) Engine Compartment
- Engine Room Harness (Passenger Compartment)
- Engine Room Harness (LH View) Engine Compartment
- Engine Control Harness, Engine Control Sub-harness-1, Engine Control Sub-harness-2 and Engine Control Sub-harness-3
- Body Harness, Rear Sonar Sensor Sub-harness and Trailer Tow Sub-harness
- Body No. 2 Harness and Fuel Tank Sub-harness
- Room Lamp Harness and Overhead Console harness
- Back Door Harness and Back Door No. 2 Harness
To use the grid reference
1. Find the desired connector number on the connector list.
2. Find the grid reference.
3. On the drawing, find the crossing of the grid reference letter column and number row.
4. Find the connector number in the crossing zone.
5. Follow the line (if used) to the connector.

CONNECTOR SYMBOL
Main symbols of connector (in Harness Layout) are indicated below.