Removal And Installation For Low-Pressure Flexible Hose

REFRIGERANT LINES


Removal and Installation for Low-Pressure Flexible Hose


REMOVAL
1. Discharge the refrigerant. Refer to Procedures.

CAUTION:
Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
2. Remove the engine under cover.
3. Remove the low-pressure flexible hose. Refer to Locations.

INSTALLATION
Installation is in the reverse order of removal. Refer to Locations.

CAUTION:
- Replace the O-ring of the low-pressure flexible hose with a new one, then apply compressor oil to it when installing it.
- After charging refrigerant, check for leaks.