MTC

REFRIGERANT LINES


Removal and Installation for High-pressure Flexible Hose


REMOVAL
1. Discharge the refrigerant. Refer to Procedures.
2. Remove the engine under cover.
3. Remove the high-pressure flexible hose. Refer to Locations.

CAUTION:
Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.

INSTALLATION
Installation is in the reverse order of removal. Refer to Locations.

CAUTION:
- Replace the O-ring of the high-pressure flexible hose with a new one, then apply compressor oil to it when installing it.
- After charging refrigerant, check for leaks.