One-Way Clutch Outer Race Sub Assembly And 2nd Coast Brake Hub And One-Way Clutch No.1

REPAIR FOR COMPONENT PARTS


One-Way Clutch Outer Race Sub Assembly and 2nd Coast Brake Hub and One-Way Clutch No.1


COMPONENTS





DISASSEMBLY






1. Remove thrust washer from one-way clutch outer race sub assembly.






2. Remove 2nd coast brake hub from one-way clutch outer race sub assembly.
3. Remove thrust washer from 2nd coast brake hub.






4. Remove one-way clutch No.1 from one-way clutch outer race sub assembly.

ASSEMBLY






1. Install one-way clutch No.1 into the one-way clutch outer race sub assembly.

CAUTION:
Do not mistake the direction of one-way clutch No.1.






2. Install thrust washer into 2nd coast brake hub.

CAUTION:
Coat the thrust washer with petroleum jelly. Align the tab of the washer with the hollow of the 2nd coast brake hub.

3. Install 2nd coast brake hub into one-way clutch outer race sub assembly.

CAUTION:
While turning the 2nd coast brake hub, slide it into one-way clutch outer race sub assembly.






4. Coat the thrust washer with petroleum jelly. Align the tab of the washer with the hollow of the one-way clutch outer race sub assembly.

CAUTION:
Apply petroleum jelly to thrust washer.

INSPECTION






- Hold one-way clutch outer race sub assembly, and check that 2nd coast brake hub turns freely clockwise and locks counterclockwise.