B1211

B1209 - B1211 COLLISION DETECTION





Description

DTC B1209 - B1211 COLLISION DETECTION
The air bag diagnosis sensor unit will set this DTC if it has detected a collision or rollover which has resulted in a deployment of one or more air bags or pre-tensioners. If this DTC is detected after a SRS repair, the air bag diagnosis sensor unit has not yet been replaced. This DTC can not be erased.

PART LOCATION
Locations.

DTC Logic

DTC DETECTION LOGIC

With CONSULT-III






DTC CONFIRMATION PROCEDURE (With CONSULT-III)
1.INSPECTION START
Turn ignition switch ON.
- GO TO 2.
2.CHECK SELF-DIAG RESULT
Check for the DTC on CONSULT-III.
Is the DTC detected?
YES - B1209.
NO - Inspection End.

Diagnosis Procedure (Component Diagnosis)
For Frontal Collision or For Side and Rollover Collision.