Operation CHARM: Car repair manuals for everyone.

With Navigation


U1000 CAN COMM CIRCUIT





Description
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN-H, CAN-L) allowing a high rate of information transmission with less wiring. Each control unit transmits/receives data but selectively reads required data only.
CAN Communication Signal Chart. CAN Communication Signal Chart.

DTC Logic

DTC DETECTION LOGIC






Diagnosis Procedure
1.PERFORM SELF DIAGNOSTIC
1. Turn ignition switch ON and wait for 2 seconds or more.
2. Check "Self Diagnostic Result" of "AV Control Unit".
Is "CAN COMM CIRCUIT" displayed?
YES - Refer to "LAN system". Trouble Diagnosis Flow Chart.
NO - Refer to General Information. Intermittent Incident.