Pedal Adjusting Switch Power Supply And Ground Circuit Inspection

ADJUSTABLE PEDAL SYSTEM


Pedal Adjusting Switch Power Supply and Ground Circuit Inspection

Regarding Wiring Diagram information, Electrical Diagrams.
1. CHECK PEDAL ADJUSTING SWITCH POWER SUPPLY





1. Turn ignition switch OFF.
2. Disconnect pedal adjusting switch.
3. Check voltage between pedal adjusting switch connector M83 terminal 1 and ground.

1 - Ground : Battery voltage.

Is inspection result normal?
YES - GO TO 2
NO - Repair or replace harness.
2. CHECK PEDAL ADJUSTING SWITCH GROUND CIRCUIT





Check continuity between pedal adjusting switch connector M83 terminal 4 and ground.

4 - Ground : Continuity should exist.

Is inspection result normal?
YES - Pedal adjusting switch power supply and ground circuit is OK.
NO - Repair or replace harness.