With Navigation

STEERING SWITCH


Description

When one of the steering wheel audio control switches is pushed, the resistance in the steering wheel audio control switch circuit changes depending on which button is pushed.





STEERING SWITCH


Diagnosis Procedure

Regarding Wiring Diagram information, With Navigation.
1.CHECK STEERING WHEEL AUDIO CONTROL SWITCH RESISTANCE





1. Turn ignition switch OFF.
2. Disconnect steering wheel audio control switch connector M102.
3. Check resistance between steering switch connector terminals.







Do the steering wheel audio control switches check OK?
YES - GO TO 2.
NO - Replace steering wheel audio control switch. With Navigation.
2.CHECK HARNESS





1. Turn ignition switch OFF.
2. Disconnect AV control unit connector M161 and spiral cable connector M30.
3. Check continuity between AV control unit harness connector
M161 (A) and spiral cable harness connector M30 (B).






4. Check continuity between AV control unit connector M161 (A) and ground.





Are the continuity results as specified?
YES - GO TO 3.
NO - Repair harness.
3.SPIRAL CABLE CHECK





1. Disconnect spiral cable connector M102.
2. Check continuity between spiral cable harness connector M30
(A) and M102 (B).





Does the spiral cable check OK?
YES - Inspection End.
NO - Replace spiral cable. Service and Repair.