Operation CHARM: Car repair manuals for everyone.

Luggage Floor Trim





LUGGAGE FLOOR TRIM


Removal and Installation













REMOVAL
1. Remove 2nd and 3rd row seat belts. Front Seat Belt, and Third Row Seat Belt.
2. Remove third row seat belt buckles.
3. Remove third row seat assembly. Exploded View.
4. Remove back door weatherstrip. Removal And Installation.
5. Remove rear luggage room lamp. Service and Repair.
- Disconnect harness from lamp.
6. Remove rear upper finisher. Service and Repair.
7. Remove rear door kicking plates. Service and Repair.
8. Remove rear lower finisher.
9. Disconnect door open/close link. Removal And Installation.
10. Remove cargo net hooks.
11. Remove luggage side lower finishers LH/RH.
- Disconnect power point and the third row seat switch harness connectors RH side, if equipped.
12. Remove coat hooks.
13. Remove luggage side upper finishers LH/RH.
- Disconnect harness to door open/close switch, LH side.
14. Remove tie down hooks LH/RH.
15. Remove floor side finishers LH/RH.
16. Remove luggage floor board.
17. Remove storage box.
18. Remove front luggage floor bracket.
19. Remove rear luggage box bracket.

INSTALLATION
Installation is in the reverse order of removal.