Pedal Adjusting Motor Circuit Inspection

ADJUSTABLE PEDAL SYSTEM


Pedal Adjusting Motor Circuit Inspection

Regarding Wiring Diagram information, Electrical Diagrams.
1. CHECK PEDAL ADJUSTING SWITCH





1. Turn ignition switch OFF.
2. Disconnect pedal adjusting switch.
3. Check continuity between pedal adjusting switch terminals as follows.









Is inspection result normal?
YES - GO TO 2
NO - Replace pedal adjusting switch. Exploded View.
2. CHECK PEDAL ADJUSTING MOTOR HARNESS





1. Disconnect pedal adjusting motor.
2. Check continuity between pedal adjusting switch connector M83
(A) terminals 2, 3 and pedal adjusting motor connector E167 (B) terminals 1, 2.





3. Check continuity between pedal adjusting switch connector M83
(A) terminals 2, 3 and ground.





Is inspection result normal?
YES - GO TO 3
NO - Repair or replace harness.
3. CHECK PEDAL ADJUSTING MOTOR POWER SUPPLY





1. Connect pedal adjusting switch.
2. Check voltage between pedal adjusting motor connector E167 and ground.







Is inspection result normal?
YES - Replace pedal adjusting motor. Service and Repair.
NO - Repair or replace harness.