With Intelligent Key System

HORN FUNCTION


Description

Perform answer-back for each operation with horn.





HORN FUNCTION


Diagnosis Procedure

Regarding Wiring Diagram information, Intelligent Key Unit.
1.CHECK HORN FUNCTION
Check horn function with horn switch
Do the horns sound?
YES - GO TO 2
NO - Go to Electrical Diagrams.
2.CHECK HORN RELAY POWER SUPPLY
1. Turn ignition switch ON.
2. Perform "ACTIVE TEST", "HORN" with CONSULT-Ill.





3. Using an oscilloscope or analog voltmeter, check voltage between horn relay harness connector and ground.





Is the inspection result normal?
YES - GO TO 4
NO - GO TO 3
3.CHECK HORN RELAY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect IPDM E/R and horn relay connector.





3. Check continuity between IPDM E/R harness connector and horn relay harness connector.





4. Check continuity between IPDM E/R harness connector and ground.





Is the inspection result normal?
YES - GO TO 4
NO - Repair or replace harness.
4.CHECK INTERMITTENT INCIDENT
Intermittent Incident.
Is the inspection result normal?
YES - Replace IPDM E/R. Service and Repair.
NO - Repair or replace the malfunctioning part.