For USA (Federal) And Canada

P1212 TCS COMMUNICATION LINE





Description
This CAN communication line is used to control the smooth engine operation during the TCS operation. Pulse signals are exchanged between ECM and "ABS actuator and electric unit (control unit)".




DTC Logic

DTC DETECTION LOGIC

NOTE:
- If DTC P1212 is displayed with DTC UXXXX, first perform the trouble diagnosis for DTC UXXXX.
- If DTC P1212 is displayed with DTC P0607, first perform the trouble diagnosis for DTC P0607. For USA (Federal) And Canada.
- Be sure to erase the malfunction information such as DTC not only for "ABS actuator and electric unit (control unit)" but also for ECM after TCS related repair.
Freeze frame data is not stored in the ECM for this self-diagnosis.






DTC CONFIRMATION PROCEDURE
1.PRECONDITIONING
TESTING CONDITION:
Before performing the following procedure, confirm that battery voltage is more than 10.5 V at idle.
- GO TO 2.
2.PERFORM DTC CONFIRMATION PROCEDURE
1. Start engine and let it idle for at least 10 seconds.
2. Check 1st trip DTC.
Is 1st trip DTC detected?
YES - Go to For USA (Federal) And Canada.
NO - INSPECTION END




Diagnosis Procedure
Go to VDC/TCS/ABS.