Without Intelligent Key System

P1615 DIFFERENCE OF KEY





Description
Performs ID verification through BCM when ignition knob switch is pressed.
Prohibits the release of steering lock or start of engine when an unregistered ID of ignition key is used.




DTC Logic

DTC DETECTION LOGIC






DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
1. Insert ignition key into key cylinder.
2. Turn ignition knob switch.
3. Check "Self Diagnostic Result" with CONSULT-III.
Is DTC detected?
YES - Without Intelligent Key System.
NO - INSPECTION END




Diagnosis Procedure
1.PERFORM INITIALIZATION
Perform initialization with CONSULT-III. Re-register all ignition keys.
For initialization and registration of ignition key. Refer to "CONSULT-III Operation Manual NATS-IVIS/NVIS".
Can the system be initialized and can the engine be started with re-registered ignition key?
YES - INSPECTION END (Ignition key was unregistered.)
NO - BCM is malfunctioning.
- Replace BCM. Removal And Installation.
- Perform initialization again.