Removal and Installation

COOLING FAN


Removal and Installation


REMOVAL
1. Remove engine under cover.
2. Drain engine coolant from radiator. Draining.

CAUTION:
Perform this step when the engine is cold.
3. Remove air duct (inlet). Exploded View.
4. Remove radiator hose (upper) and reservoir tank hose. Exploded View.
5. Disconnect harness connector from fan motor, and move harness to aside.
6. Remove cooling fan assembly.

CAUTION:
Be careful not to damage or scratch on radiator core when removing.

INSTALLATION
Note the following, and install in the reverse order of removal.

CAUTION:
Only use genuine parts for radiator shroud and cooling fan mounting bolt and observe the specified torque (to prevent radiator from being damaged).

NOTE:
Cooling fan is controlled by ECM. For details, For California (for California), For Mexico (for Mexico) or For USA (Federal) And Canada (Except for California and Mexico).