Engine Controls - ECM Reprogram Interruption Recovery: Overview

Classification: EC10-007A

Reference: NTB10-027A

Date: April 5, 2010

ECM REPROGRAM INTERRUPTION RECOVERY

This bulletin has been amended. 2010 Versa has been added to the Applied Vehicles. Please discard previous version of this bulletin.

APPLIED VEHICLES: 2008 - 2010 Rogue (S35)
2010 Versa (C11) with HR16DE or MR18DE engine

IF YOU CONFIRM

While performing ECM (Engine Control Module) reprogramming, the reprogramming stops (is interrupted) before it is 100% complete.

NOTE:
One of the following error messages may appear on the C-III screen:

^ The VI probe is disconnected on USB, please check the connection of the probe.

^ Reprogramming fail, "Error code 0".

ACTION

Perform the reprogramming recovery procedure in this bulletin.

NOTE:
^ In many cases, reprogramming recovery is possible if the complete ECM part number has been registered into the ECM before reprogramming stopped.

^ ECM is referred to as ECU in CONSULT III.

CLAIMS INFORMATION

The procedure in this bulletin is part of the reprogramming process. Submit only the claim associated with the repairs performed for ECM reprogramming.