Cruise Test

ROAD TEST

Cruise Test

1.CHECK VEHICLE SPEED WHEN SHIFTING GEARS (PART 1)
1. Drive vehicle for approximately 10 minutes to warm engine oil and CVT fluid up to operating temperature.

CVT fluid operating temperature : 50 - 80�C (122 - 176�F)

2. Park vehicle on flat surface.
3. Shift selector lever to "P" position.
4. Start engine.
5. Shift selector lever to "D" position.

6. Accelerate vehicle at 2/8 throttle opening and check "Vehicle
Speed When Shifting Gears".

With CONSULT-III
- Read vehicle speed and engine speed. Vehicle Speed When Shifting Gears.
Is the inspection result normal?
YES - GO TO 2.
NO - Symptom Related Diagnostic Procedures. GO TO 2.
2.CHECK VEHICLE SPEED WHEN SHIFTING GEARS (PART 2)
1. Park vehicle on flat surface.
2. Shift selector lever to "D" position.

3. Accelerate vehicle at 8/8 throttle opening and check "Vehicle
Speed When Shifting Gears".

With CONSULT-III
- Read vehicle speed and engine speed. Vehicle Speed When Shifting Gears.
Is the inspection result normal?
YES-1 (Without manual mode)-GO TO 3.
YES-2 (With manual mode)-GO TO 8.
NO-1 (Without manual mode)-Refer to Symptom Related Diagnostic Procedures. GO TO 3.
NO-2 (With manual mode)- Symptom Related Diagnostic Procedures.
GO TO 8.
3.CHECK OVERDRIVE OFF CONDITION (PART 1)
1. Park vehicle on flat surface.
2. Push overdrive control switch.

3. Accelerate vehicle at 2/8 throttle opening and check "Vehicle
Speed When Shifting Gears".

With CONSULT-III
- Read vehicle speed and engine speed. Vehicle Speed When Shifting Gears.
Is the inspection result normal?
YES - GO TO 4.
NO - Symptom Related Diagnostic Procedures. GO TO 4.
4.CHECK OVERDRIVE OFF CONDITION (PART 2)
1. Park vehicle on flat surface.
2. Push overdrive control switch.

3. Accelerate vehicle at 2/8 throttle opening and check "Vehicle
Speed When Shifting Gears".

With CONSULT-III
- Read vehicle speed and engine speed. Vehicle Speed When Shifting Gears.
Is the inspection result normal?
YES - GO TO 6.
NO - Symptom Related Diagnostic Procedures. GO TO 6.
6.CHECK "L" POSITION FUNCTION (PART 2)
1. Park vehicle on flat surface.
2. Shift selector lever to "L" position.

3. Accelerate vehicle at 8/8 throttle opening and check "Vehicle
Speed When Shifting Gears".

With CONSULT-III
- Read vehicle speed and engine speed. Vehicle Speed When Shifting Gears.
Is the inspection result normal?
YES - GO TO 7.
NO - Symptom Related Diagnostic Procedures. GO TO 7.
7.CHECK ENGINE BRAKE FUNCTION
Check engine brake.
Does engine braking effectively reduce vehicle speed in "L" position?
YES - 1. Stop the vehicle.
2. Perform "Self Diagnostic Results" in "TRANSMISSION".
NO - Symptom Related Diagnostic Procedures. Then continue trouble diagnosis.
8.CHECK MANUAL MODE FUNCTION
Shift to manual mode from "D" position.
Does it switch to manual mode?
YES - GO TO 9.
NO - Symptom Related Diagnostic Procedures. GO TO 9.
9.CHECK SHIFT-UP FUNCTION
During manual mode driving, is upshift from M1 to M2 to M3 to M4 to M5 to M6 performed?

With CONSULT-III
- Read gear position. CONSULT-III Function (Transmission).
Is upshifting correctly performed?
YES - GO TO 10.
NO - Symptom Related Diagnostic Procedures. GO TO 10.
10.CHECK SHIFT-DOWN FUNCTION
During manual mode driving, is downshift from M6 to M5 to M4 to M3 to M2 to M1 performed?

With CONSULT-III
- Read gear position. CONSULT-III Function (Transmission).
Is downshifting correctly performed?
YES - GO TO 11.
NO - Symptom Related Diagnostic Procedures. GO TO 11.
11.CHECK ENGINE BRAKE FUNCTION
Check engine brake.
Does engine braking effectively reduce vehicle speed in M1 position?
YES - 1. Stop the vehicle.
2. Perform "Self Diagnostic Results" in "TRANSMISSION".
NO - Symptom Related Diagnostic Procedures. Then continue trouble diagnosis.