Without Intelligent Key

DOOR

Removal and Installation


CAUTION:
- When removing and installing a door assembly, support the door with a jack and shop cloth to protect the door and body.
- When removing and installing a door assembly, be sure to carry out the fitting adjustment.
- Check the hinge rotating point for poor lubrication. If necessary, apply "body grease".

FRONT DOOR

Removal
1.Remove the front door glass and regulator. Service and Repair.
2.Remove the door harness.





3.Remove the check link bolt from the hinge pillar.
Check link to hinge pillar bolt : 14.7 Nm (1.5 kg-m, 11 ft-lb)






4.Remove the door-side hinge nuts, and the door assembly.

Door hinge nuts24.5 Nm (2.5 kg-m, 18 ft-lb)

Installation
Installation is in the reverse order of removal.
Align the front door. Adjustments.

REAR DOOR

Removal
1.Remove the door finisher. Service and Repair.
2.Remove the inner seal.
3.Remove the rear door speaker. Base Audio (BASE AUDIO), Mid Audio (MID AUDIO), Without Navigation (BOSE AUDIO WITHOUT NAVIGATION) or With Navigation (BOSE AUDIO WITH NAVIGATION).
4.Remove the rear door tweeter. With Navigation (BOSE AUDIO WITH NAVIGATION).
5.Remove the rear door glass and regulator. Service and Repair.
6.Remove the door harness.





7.Remove the check link bolt from the hinge pillar.
Check link to hinge pillar bolt : 14.7 Nm (1.5 kg-m, 11 ft-lb)






8.Remove the door-side hinge nuts, and remove the door assembly.

Door hinge nuts25.8 Nm (2.6 kg-m, 19 ft-lb)

Installation
Installation is in the reverse order of removal.
Align the rear door. Adjustments.

BACK DOOR

Removal
1.Remove the glass hatch. Removal and Replacement.
2.Remove the license lamp finisher. Service and Repair.
3.Remove the back door lock assembly. Without Intelligent Key System.
4.Remove the back door wire harness.
5.Remove the rear wiper motor. Service and Repair.
6.Remove the rear washer nozzle and hose from the back door. Service and Repair
7.Remove the high mounted stop light. Service and Repair.
8.Support the back door.
9.Remove the back door stays.
10.Remove the door side nuts and the back door assembly.

CAUTION:
Two technicians should be used to avoid damaging the back door during removal.





Installation
Installation is in the reverse order of removal.
Align the rear door. Adjustments.