BCM (Body Control Module)

POWER SUPPLY AND GROUND CIRCUIT

BCM (BODY CONTROL MODULE) : Diagnosis Procedure

Regarding Wiring Diagram information, [1][2]Body Control Systems.

1. CHECK FUSES AND FUSIBLE LINK

Check that the following fuses and fusible link are not blown.





Is the fuse blown?
YES- Replace the blown fuse or fusible link after repairing the affected circuit.
NO- GO TO 2

2. CHECK POWER SUPPLY CIRCUIT






1.Turn ignition switch OFF.
2.Disconnect BCM.
3.Check voltage between BCM harness connector and ground.





Is the measurement value normal?
YES- GO TO 3
NO- Repair or replace harness.

3. CHECK GROUND CIRCUIT






Check continuity between BCM harness connector and ground.





Does continuity exist?
YES- Inspection End.
NO- Repair or replace harness.