Preliminary Check

INSPECTION AND ADJUSTMENT

Preliminary Check

NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II
User Guide for additional information.
- Activate and display TPMS transmitter IDs
- Display tire pressure reported by the TPMS transmitter
- Read TPMS DTCs
- Register TPMS transmitter IDs

1. TIRE PRESSURE

Check all tire pressures. Specifications.
Do tire pressures match specification?
YES- GO TO 2.
NO- Adjust tire pressures to specified value.

2. LOW TIRE PRESSURE WARNING LAMP

Check low tire pressure warning lamp activation.
Does the low tire pressure warning lamp activate for one second when ignition switch is turned ON?
YES- GO TO 3.
NO- GO TO Low Tire Pressure Warning Lamp Does Not Come On When Ignition Switch Is Turned On, "Low Tire Pressure Warning Lamp Does Not Come On When Ignition Switch Is
Turned On".

3. BCM CONNECTOR

1.Disconnect BCM harness connectors.
2.Check terminals for damage or loose connections.
3.Reconnect harness connectors.
Are BCM connectors damaged or loose?
YES- Repair or replace damaged parts.
NO- GO TO 4.

4. TRANSMITTER ACTIVATION TOOL

Check battery in transmitter activation tool.
Is transmitter activation tool battery fully charged?
YES- Perform self-diagnosis. Self-Diagnosis (With CONSULT).
NO- Replace battery in transmitter activation tool.