Low-Pressure Pipe

LOW-PRESSURE PIPE

Removal and Installation for Rear High- and Low-Pressure A/C Pipes


REMOVAL

1.Discharge the refrigerant. HFC-134A (R-134A) Service Procedure.
2.Remove the luggage side lower finisher RH. Component.
3.Remove the rear high- and low-pressure A/C pipes. Component.

CAUTION:
Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.

INSTALLATION

Installation is in the reverse order of removal.
Component.

CAUTION:
- Do not reuse O-rings.
- Apply A/C oil to the O-ring of the rear high- and low-pressure A/C pipes for installation.
- After charging refrigerant, check for leaks.