Equipment Hookup & Adjustment Procedures

TIMING PROCEDURE

1987 E16 2V: Check timing against specified value. Disconnect and plug vacuum sensor hose before adjusting.

1987-90 E16 FI, GA16: Check timing against specified value. Disconnect throttle sensor harness before adjusting.

CA16 CA18 DOHC: Remove spark plug/coil cover. Connect inductive clamp to wire between #1 coil and spark plug. Rotate crank angle sensor to adjust.

1990 2960cc 300ZX: Remove #1 coil from mount and connect inductive clamp to high tension wire. Rotate crank angle sensor to adjust.

1981-86 All Others: Disconnect and plug distributor vacuum hose, as equipped.

1987-90 All Others: Set timing to specified value.