Electrical - Battery Testing Procedures/Equipment
Classification:EL99-O16p
Reference:
NTB99-048p
Date:
September 13, 2007
BATTERY TESTING FOR NISSAN ORIGINAL EQUIPMENT AND
GENUINE NISSAN REPLACEMENT BATTERIES
This bulletin has been amended.
Please discard all previous copies of this bulletin.
APPLIED VEHICLES:
All Nissan SERVICE INFORMATION
The new Battery Service Center (BSC) is the factory-approved battery tester. The Essential Tool number for this tester is J-48087.
^ For claim reimbursement purposes, use of the "BSC" is required when testing any Nissan Original Equipment or Genuine Nissan Replacement battery.
^ For more information, refer to the current Nissan Assurance Products Resource Manual.
^ Print-outs from the BSC are required to accurately document the test codes for warranty claims.
^ For the complete BSC User Guide, refer to ASIST - TOOLS & EQUIPMENT.
^ Additional tools and replacement parts can be ordered from TECH-MATE.
When setting up the "BSC" for testing, a [battery CCA] rating is required.
^ CCA stands for Cold Cranking Amps.
NOTE:
^ The BSC is equipped with a scanner that can be used to scan the VIN on most vehicles.
^ Scanning the VIN will give the tester the [CCA rating] information for original equipment batteries.
^ For replacement batteries, the [CCA rating] from the battery label must be entered into the BSC manually.
For Nissan Original Equipment Batteries:
^ When using the BSC, make sure the correct vehicle [CCA rating] is entered by scanning the VIN, or entering it manually from the battery label.
NOTE:
If the VIN cannot be scanned, enter it manually.
^ Make sure to select "ORG EQUIPMENT" on the tester.
^ The [CCA RATING] entered during testing is recorded in the 12-character test output code required for warranty repairs.
^ Claims that are submitted with incorrect [CCA RATING] may be suspended or denied.
Genuine Nissan Replacement Batteries (service part replacements for Nissan Original Equipment Batteries):
^ Scan the VIN, select "GEN REPLACEMENT", then Manually enter the CCA rating from the battery label into the BSC.
NOTE:
If the VIN cannot be scanned, enter it manually.
IMPORTANT:
When using the BSC, you will get inaccurate test results if you don't enter the correct [CCA RATING]
^ The [CCA RATING] entered during testing is recorded in the 12-character test output code required for warranty repairs.
^ Claims that are submitted with incorrect [CCA RATING] may be suspended or denied.
Disclaimer