Engine: Technical Service Bulletins

• Customer Interest
  • Engine - Metallic Rattle Noise During Warm-Up
  • Engine Controls - Intermittent Engine Surge/Hesitation
  • Fuel - Driveability/Lack of Power/Poor Idle
  • Power Steering - Grinding/Scraping Noises
  • Engine Controls - Hesitation or Surging Under Load
  • Fuel - Rough, Erratic or No Idle Condition
  • Engine - Oil Level and Grade, Driveability
  • Fuel - Fast Idle Speed RPM Too High
• By Symptom
  • Customer Interest
    • Engine - Metallic Rattle Noise During Warm-Up
    • Engine Controls - Intermittent Engine Surge/Hesitation
    • Fuel - Driveability/Lack of Power/Poor Idle
    • Power Steering - Grinding/Scraping Noises
    • Engine Controls - Hesitation or Surging Under Load
    • Fuel - Rough, Erratic or No Idle Condition
    • Engine - Oil Level and Grade, Driveability
    • Fuel - Fast Idle Speed RPM Too High
  • Driveability
    • Engine Controls - Intermittent Engine Surge/Hesitation
    • Fuel - Driveability/Lack of Power/Poor Idle
    • Engine Controls - Hesitation or Surging Under Load
    • Fuel - Rough, Erratic or No Idle Condition
    • Engine - Oil Level and Grade, Driveability
    • Fuel - Fast Idle Speed RPM Too High
  • High emissions
    • Emissions System - Troubleshooting Tips
  • Inoperative
    • Engine Controls - Hesitation or Surging Under Load
  • Noise
    • Engine - 3 Kinds of Noise
    • Engine - Metallic Rattle Noise During Warm-Up
    • Power Steering - Grinding/Scraping Noises
  • Out of specification
    • Engine Controls - Intermittent Engine Surge/Hesitation
  • Poor performance
    • Fuel - Rough, Erratic or No Idle Condition
  • Starting problems
    • Engine Controls - Idle, Base Idle & Timing, Startability
      • Overview
      • Service Procedure
• All Technical Service Bulletins
  • Engine - Drive Belt Noise Diagnosis
  • Engine - Reman Engine Start Up Lubrication Information
  • Engine/Transmission - Precautions During R&R Procedure
  • Engine - Angular Tightening Tools
  • Engine - 3 Kinds of Noise
  • Engine - Metallic Rattle Noise During Warm-Up
  • Engine - Oil Pan Liquid Gasket Installation Procedure
  • Tools - Essential Tool Release, Engine, A/C
  • Engine Controls - Intermittent Engine Surge/Hesitation
  • A/C Compressor Idler Pulley - Correct Assembly
    • Overview
    • Truck/Pathfinder (Z24 Engine)
    • Truck/Pathfinder (VG30 Engine)
    • Sentra/Pulsar NX (E16 Engine)
    • Stanza/Pulsar NX (CA Engine)
    • 200SX (CA Engine)
    • 200SX (VG30 Engine)
    • Stanza Wagon
    • Van
  • Engine - Connecting Rod Torque Repair Manual Corrections
  • Engine - Coding System to Match Bearings to Crankshaft
  • Engine - Replacement Pistons
  • Vehicle - Service Manual Amendments
  • Fuel - Driveability/Lack of Power/Poor Idle
  • Power Steering - Grinding/Scraping Noises
  • Remanufactured Distributor - Program
  • Ignition Timing/Idle Speed - Repair Manual Correction
  • Emissions System - Troubleshooting Tips
  • Emission - Inspection/Maintenance Program Overview
  • Engine Controls - Idle, Base Idle & Timing, Startability
    • Overview
    • Service Procedure
  • Engine Controls - Hesitation or Surging Under Load
  • Fuel - Rough, Erratic or No Idle Condition
  • Engine - Oil Level and Grade, Driveability
  • Fuel - Fast Idle Speed RPM Too High
  • Fuel System - Cold Weather Engine Starting Tips