Fuel Pump: Service and Repair

Fuel Pump Fuse:

1. Remove the fuse for the fuel pump (located in the fuse panel in the left knee bolster).
2. Turn the ignition key to the start position for approximately 15 seconds (this will release the fuel pressure).

Fuel Tank Components:

3. Remove upper and lower portions of rear seat.
4. Remove round fuel pump access panel.
5. Remove fuel pump electrical connector.
6. Remove fuel pump mounting screws.
7. Lift fuel pump assembly from tank.
8. Reverse procedure to reinstall, using a new o-ring and torque fuel pump assembly to 1.4 - 1.9 ft-lb (2 - 2.5 Nm).