Manual Shaft and Throttle Lever

MANUAL SHAFT AND THROTTLE LEVER





REMOVAL



1. Remove detent spring from transmission case.




2. Pull out throttle shaft retaining pin, then draw out throttle shaft from transmission case.




3. Drive out manual plate retaining pin.




4. Drive and then pull out parking rod plate retaining pin.




5. Remove parking rod plate from manual shaft.
6. Draw out parking rod from transmission case.




7. Pull out manual shaft retaining pin.
8. Remove manual shaft and manual plate from transmission case.




9. Remove manual shaft oil seal.

INSPECTION
- Check component parts for wear or damage. Replace if necessary.

INSTALLATION




1. Install manual shaft oil seal.
- Apply A.T.F. to outer surface of oil seal.




2. Install throttle lever and return spring on throttle shaft.
3. Install throttle lever assembly on transmission case.




4. Align groove of throttle shaft and hole of transmission case.
5. Install throttle shaft retaining pin.




6. Move throttle lever in the direction of the arrow.
7. Install manual shaft and manual plate.




8. Align groove of manual shaft and hole of transmission case.
9. Install manual shaft retaining pin.




10. Install parking rod to parking rod plate.
11. Install parking rod assembly to manual shaft.




12. Install manual plate retaining pin and parking rod plate retaining pin.




13. Install detent spring.