Crankshaft, Bearings and Connecting Rods

Crankshaft:
Standard Journal Diameter:
Main Bearing [09]
Crank Pin [10]

Out Of Round [01] 0.0002
Taper [01] 0.0002

Bearing Clearance:
Main Bearings 0.0011-0.0022
Connecting Rod Bearings 0.0011-0.0019

Connecting Rods:
Piston Pin Bore Diameter 0.8661-0.8666
Side Clearance 0.0079-0.0138

[01] -- Maximum.
[09] -- Grade 0, 2.4790-2.4793 inch; grade 1, 2.4787-2.4790 inch; grade 2, 2.4784-2.4787 inch.
[10] -- Grade 0, 1.9672-1.9675 inch; grade 1, 1.9670-1.9672 inch; grade 2, 1.9667-1.9670 inch.

NOTE: All Measurements are given in inches unless otherwise specified.