Displaying and Reading Trouble Codes

How to Display and Read Diagnostic Trouble Codes



Using the Warning Lamp

Self-diagnosis results can be also read by using the "AIR BAG" warning lamp.

The "Air bag" warning lamp operates as shown below:

- Problem codes are displayed in present diagnosis mode (self-diagnosis result 1).


- The problem code last indicated is displayed in initial diagnosis mode (self-diagnosis result 2).


- After the malfunctioning parts have been repaired and the system is returned to the user mode, the present diagnosis mode information, displayed as self-diagnosis results, is automatically cleared from memory.



- After repairing malfunctioning part, attempt to clear self-diagnosis results from memory.



- If a malfunctioning part is not completely repaired, information stored in memory will not be cleared.

Warning Lamp Flashing Times And Repair:

WARNING LAMP FLASH CODE CHART

NOTE:
Self-diagnosis results in present- and initial-diagnosis modes can be identified by number of flashes �. Refer to Table for troubled parts.