Rear Internal Gear and Forward Clutch Hub

Rear Internal Gear And Forward Clutch Hub:

COMPONENTS

DISASSEMBLY




1. Remove rear internal gear by pushing forward clutch hub forward.




2. Remove thrust washer from rear internal gear.




3. Remove snap ring from forward clutch hub.




4. Remove end bearing.




5. Remove forward one-way clutch and end bearing as a unit from forward clutch hub.




6. Remove snap ring from forward clutch hub.

INSPECTION




Rear internal gear and forward clutch hub
- Check gear for excessive wear, chips or cracks.
- Check frictional surfaces of forward one-way clutch and thrust washer for wear or damage.
- Check spline for wear or damage.




Snap ring and end bearing
- Check for deformation or damage.

ASSEMBLY




1. Install snap ring onto forward clutch hub.
2. Install end bearing.




3. Install forward one-way clutch onto clutch hub.
- Install forward one-way clutch with flange facing rearward.
4. Install end bearing.
5. Install snap ring onto forward clutch hub.




6. Install thrust washer onto rear internal gear.
- Apply petroleum jelly to thrust washer.
- Securely insert pawls of thrust washer into holes in rear internal gear.




7. Position forward clutch hub in rear internal gear.




8. After installing, check to assure that forward clutch hub rotates clockwise.