Wheel Balance Adapter Kit

1. Install the wheel balance adapter kit (Kent-Moore tool # J42625-280) on the wheel and wheel balance machine in the order shown.

2. Refer to Nissan Service Bulletin "Wheel Balance Machine Adapter Kits" (NTB97-012) for further information.

3. Road test the vehicle at 60-70 mph.

4. After the road test is complete, determine if the steering and/or body vibration still exists:

A. If the vibration no longer exists, the procedure is complete.

B. If the vibration still exists, complete Steering Rack Sliding Force Measurement at normal operating temperature.