Disassembly and Assembly

DISASSEMBLY





- Remove grease seal and bearing outer races with suitable brass bar.

INSPECTION
Thoroughly clean wheel bearings and wheel hub.

Wheel Bearing
- Make sure wheel bearing rolls freely and is free from noise, crack, pitting and wear.

Wheel Hub
- Check wheel hub for crack by using a magnetic exploration or dyeing test.

ASSEMBLY





1. Install bearing outer race with Tool until it seats in hub.





2. Pack multipurpose grease into wheel hub.-4WD
3. Apply multipurpose grease to each bearing cone.





4. Pack grease seal lip with multipurpose grease, then install it into wheel hub with suitable drift.