Installation

R200A - Front Final Drive:

R200A - Front Final Drive / INSTALLATION


1. Install front final drive assembly together with differential mounting member.
2. Tighten front final drive securing bolts and nuts by following the procedure to prevent drive train vibration.





a. Temporarily tighten nut A.
b. Temporarily tighten nut B.

c. Tighten bolt C to the torque of...........68 to 87 Nm (6.9 to 8.9 kg.m, 50 to 64 ft. lbs.).

d. Tighten bolt D to the torque of...........68 to 87 Nm (6.9 to 8.9 kg.m, 50 to 64 ft. lbs.).

e. Tighten nut A to the torque of...........68 to 87 Nm (6.9 to 8.9 kg.m, 50 to 64 ft. lbs.).

f. Tighten nut B to the torque of...........68 to 87 Nm (6.9 to 8.9 kg.m, 50 to 64 ft. lbs.).

g. Tighten bolt E to the torque of...........68 to 87 Nm (6.9 to 8.9 kg.m, 50 to 64 ft. lbs.).

3. Install drive shaft.
4. Install front propeller shaft.