Collision Diagnosis

SRS INSPECTION (FOR FRONTAL COLLISION) SRS Is NOT Activated:

SRS INSPECTION (FOR FRONTAL COLLISION) SRS Is NOT Activated:

SRS INSPECTION (FOR FRONTAL COLLISION)
To repair the SRS, perform the following steps.

WHEN SRS (EXCEPT THE FRONT SIDE AIR BAG AND SIDE CURTAIN AIR BAG MODULES) IS ACTIVATED IN A COLLISION
1. Replace the diagnosis sensor unit.

2. Remove the air bag modules (except the front side air bag modules and side curtain air bag modules), crash zone sensor assembly, bracket and seat belt pre-tensioner assemblies.

3. Check the SRS components using the table:
Replace any SRS components showing visible signs of damage (dents, cracks and deformation).

4. Install new air bag modules (except the front side air bag modules and side curtain air bag modules) crash zone sensor assembly, bracket and seat belt pre-tensioner assemblies.

5. Conduct self-diagnosis using CONSULT-II or "AIR BAG" warning lamp. Refer to "SRS Operation Check" for details. Ensure entire SRS operates properly.
[1][2]Component Tests and General Diagnostics


WHEN SRS IS NOT ACTIVATED IN A COLLISION
1. Check the SRS components using the table:
Replace any SRS components showing visible signs of damage (dents, cracks and deformation).

2. Conduct self-diagnosis using CONSULT-II or "AIR BAG" warning lamp. Refer to "SRS Operation Check" for details. Ensure entire SRS operates properly.
[1][2]Component Tests and General Diagnostics

SRS INSPECTION (FOR SIDE COLLISION) SRS Is NOT Activated:

SRS INSPECTION (FOR SIDE COLLISION)
To repair the SRS, perform the following steps.


WHEN SRS IS ACTIVATED IN THE SIDE COLLISION
1. Replace the following components:
- Front seat back assembly (on the side on which side air bag is activated)
- Diagnosis sensor unit
- (LH and RH) side air bag (satellite) sensors

2. Check the SRS components and the related parts using the table.
Replace any SRS components and the related parts showing visible signs of damage (dents, cracks, deformation).

3. Conduct self-diagnosis using CONSULT-II and "AIR BAG" warning lamp. Refer to "SRS Operation Check" for details. Ensure entire SRS operates properly.
[1][2]Component Tests and General Diagnostics


WHEN SRS IS NOT ACTIVATED IN THE SIDE COLLISION
1. Check the SRS components and the related parts using the table.
If the front seat back assembly is damaged, the front seat back assembly must be replaced.

2. Conduct self-diagnosis using CONSULT-II and "AIR BAG" warning lamp. Refer to "SRS Operation Check" for details. Ensure entire SRS operates properly.
[1][2]Component Tests and General Diagnostics