King Cab

Removal and Installation

CAUTION: Wrap the tip of flat-bladed screwdriver with a cloth when removing metal clips from garnishes.

BODY SIDE TRIM








King Cab Model
1. Remove front and jump seats. Refer to"Removal and Installation"..
2. Remove kicking plates.
3. Remove dash side lower finishers. [D]
4. Remove body side welts.
5. Remove front pillar assist grips.
6. Remove front pillar garnishes. [C]
7. Remove jack cover. [F]
8. Remove lower rear pillar garnishes. [E]
9. Remove seat belt upper guide loop. Refer to "FRONT SEAT BELT" and "REAR SEAT BELT"
10. Remove upper rear pillar garnishes. [B]