Disassembly and Assembly

Disassembly and Assembly

STEERING WHEEL & STEERING COLUMN (ASSEMBLY):

NOTE: Do not disassemble the tilt mechanism.
After installing steering column, check tilt mechanism operation.







1. When disassembling and assembling, unlock steering lock with key.
2. Install lock nut on steering column shaft and tighten the nut to specification.

Steering column lock:.....................25 - 34 Nm (2.5 - 3.5 kgf-cm, 18 - 25 ft. lbs.)






3. Steering lock
Break self-shear type screws using a drill or other appropriate tool.






Install self-shear type screws, then tighten until heads break off.