Counter Gear

Counter Gear

DISASSEMBLY





1. Press out counter gear front bearing using Tool, as shown.
^ Remove front sub-gear, dish plate and spacer (M/T model only).





2. Press out counter gear rear bearing using Tool, as shown.
^ Remove rear sub-gear, dish plate and spacer (M/T model only).

INSPECTION
Gear, Shaft and Bearing





^ Check gears for excessive wear, chips or cracks.
^ Check shaft for cracks or wear.
^ Make sure bearings roll freely and are free from noise, cracks, pitting or wear.

ASSEMBLY





1. Install front sub-gear, dish plate and spacer (M/T model only).
2. Press on counter gear front bearing.
3. Install rear sub-gear, dish plate and spacer (M/T model only).
4. Press on counter gear rear bearing.