Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Changing Engine Coolant
Changing Engine CoolantWARNING: To avoid the danger of being scalded, never change the coolant when the engine is hot.
1. Set air conditioning system as follows to prevent coolant from remaining in the system.
a. Turn ignition switch ON and set temperature controller to maximum hot position.
b. Wait 10 seconds before turning ignition switch OFF.
2. Open radiator drain plug at the bottom of radiator, and remove radiator cap.
^ Be careful not to allow coolant to contact drive belts.
When draining all the coolant in the system, also perform the two following steps.
1) Remove drain plugs on both sides of cylinder block.
2) Check drained coolant for contaminants such as rust, corrosion or discoloration. If contaminated flush engine cooling system