Oil Cooler: Service and Repair

REMOVAL AND INSTALLATION





1. Drain engine oil and coolant.
2. Remove oil cooler.
3. Installation is in reverse order of removal.
^ Do not spill coolant on the drive belt.
^ Install oil cooler to oil pan aligning the protrusion of flange as shown.

INSPECTION
Oil Cooler
1. Check oil cooler for cracks.
2. Check oil cooler for clogging by blowing through coolant inlet. If necessary, replace oil cooler assembly.

Relief Valve
Inspect relief valve for movement, cracks and breaks by pushing the ball. If replacement is necessary, remove valve by prying it out with a suitable tool. Install a new valve in place by tapping it.