Accelerator Pedal: Service and Repair

Removal and Installation






CAUTION:
- Check that throttle valve opens when accelerator pedal is fully depressed. Also check that it returns to idle position when pedal is released when ignition switch is in "ON position.
- Check accelerator control parts for improper contact with any adjacent parts.

REMOVAL
1. Remove harness connector.
2. Remove mounting nut then remove accelerator pedal assembly.

CAUTION:
- Do not disassemble accelerator pedal or remove/install accelerator pedal position sensor.
- Do not drop or shock accelerator pedal assembly.
- Keep accelerator pedal assembly from getting wet.

INSTALLATION
Install in reverse order of removal.

INSPECTION AFTER INSTALLATION
- Check if accelerator pedal moves smoothly within its range.
- Check if accelerator pedal returns securely to its original position.
- Perform "Accelerator Pedal Released Position Learning when removing the accelerator pedal position sensor harness connector. Refer to "BASIC SERVICE PROCEDURE".
- For electrical inspection of accelerator pedal assembly, refer to "DTC P2138 APP SENSOR". P2138