Harness Connector

Harness Connector / Description

HARNESS CONNECTOR (TAB-LOCKING TYPE)
The tab-locking type connectors help prevent accidental looseness or disconnection.

The tab-locking type connectors are disconnected by pushing or lifting the locking tab(s). Refer to the illustration.

CAUTION: Do not pull the harness or wires when disconnecting the connector.

Harness Connector:

HARNESS CONNECTOR (SLIDE-LOCKING TYPE)
A new style slide-locking type connector is used on certain systems and components, especially those related to OBD.

The slide-locking type connectors help prevent incomplete locking and accidental looseness or disconnection.

The slide-locking type connectors are disconnected by pushing or pulling the slider. Refer to the illustration.

CAUTION: Do not pull the harness or wires when disconnecting the connector.
Be careful not to damage the connector support bracket when disconnecting the connector.






HARNESS CONNECTOR (DIRECT-CONNECT SRS COMPONENT TYPE)
SRS direct-connect type harness connectors are used on certain SRS components such as air bag modules and seat belt pre-tensioners.

Always pull up to release black locking tab prior to removing connector from SRS component.

Always push down to lock black locking tab after installing connector to SRS component. When locked, the black locking tab is level with the connector housing.






CAUTION: Do not pull the harness or wires when removing connectors from SRS components.