Restraints and Safety Systems: Service Precautions

PRECAUTION FOR SEAT BELT SERVICE

CAUTION: Before removing the seat belt pre-tensioner assembly, turn the ignition switch OFF, disconnect both battery cables and wait at least 3 minutes.

After replacing or reinstalling seat belt pre-tensioner assembly, or reconnecting seat belt pre-tensioner assembly connector; ensure entire SRS operates properly. Refer to "SRS Operation Check".
[1][2]Component Tests and General Diagnostics

Do not disassemble buckle or seat belt assembly.

Do not reuse seat belt anchor bolts after removal. Replace with new ones.

Never oil tongue and buckle.

If any component (including anchor bolts) of seat belt assembly is questionable, do not repair. Replace the whole seat belt assembly.

If webbing is cut, frayed, or damaged, replace seat belt assembly.

When replacing seat belt assembly, use a genuine NISSAN seat belt assembly.